中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

100G QSFP28 BIDI 1271nm/1331nm 10km Transceiver

Features

Supports 100GBASE-LR1- 10 BIDI
Lane signaling rate 106.25Gb/s with PAM4
Up to 10km transmission on SMF
EML Laser and PIN receiver
4x25.78Gb/s with NRZ electrical interface (CAUI-4)
High speed I/O electrical interface
I2C interface with integrated Digital Diagnostic monitoring
QSFP28 MSA package with simplex LC connector
Single +3.3V power supply
Support HW TX_DIS and RX_LOS for telecom application
Maximum power consumption 4 W
Operating case temperature: 0 to +70 °C
Compliant to 802.3cu, SFF-8636&SFF-8679 standard
Complies with EU Directive 2015/863/EU

Application

100GBASE-LR1- 10 BIDI

现在查询下载

类别

热门产品

产品详细信息

RQ-100GBD10-T27/RQ-100GBD10-T33

100Gbps QSFP28 BIDI Single Lambda Transceiver, 1271/1331nm, Single Mode,10km Reach

100G BIDI QSFP28

Absolute Maximum Ratings

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Storage Temperature	TS	-40	-	+85	°C
Supply Voltage	VCC	-0.5	-	+4.0	V
Operating Relative Humidity	RH	-	-	+85	%

Recommended Operating Conditions

Parameter	Symbol	Min.	Typical	Max.	Unit	Notes
Operating Case Temperature	TC	0	-	+70	°C
Power Supply Voltage	VCC	3.13	3.3	3.47	V
Power Supply Current	ICC	-	-	1.21	A
Maximum Power Dissipation	PD	-	-	4	W
Data Rate(optical)	DRo	-	106.25	-	Gb/s
Transmission Distance	TD	-	-	10	km	Over SMF

Electrical Characteristics

Transmitter (Module Input)
Parameter	Symbol		Min.		Typical		Max.		Unit		Notes
Input Differential Impedance	Rin		-		100		-		Ohm
Differential Data Input Amplitude	VIN,P-P		80		-		900		mVpp
Differential termination mismatch (max)	D-mismatch		-		-		10		%
DC common-mode input voltage			-0.3		-		2.8		V
Transition time (20%~80%)	Tr Tf		10		-		-		ps
LPMode, Reset and ModSelL / Tx dis	VIL		-0.3		-		0.8		V
LPMode, Reset and ModSelL / Tx dis	VIH		2.0		-		VCC+0.3		V
Receiver(ModuleOutput)
Output Differential Impedance		Rout		-		100		-		Ohm
Differential Data Output Amplitude		VOUT,P-P		-		-		900		mVpp
Differential termination mismatch (max)		D-mismatch		-		-		10		%
Transition time, 20% to 80%		Tr Tf		12		-				ps
ModPrsL and IntL/ Rx los		VOL		0		-		0.4		V
ModPrsL and IntL/ Rx los		VOH		VCC-0.5		-		VCC+0.3		V

Digital Diagnostics

Parameter	Range	Accuracy	Unit	Calibration
Temperature	0 to 70	±3	ºC	Internal
Voltage	0 to VCC	0.1	V	Internal
Tx Bias Current	0 to 100	10%	mA	Internal
Tx Output Power	-1.4 to 4.5	±3	dBm	Internal
Rx Power	-7.7 to 4.5	±3	dBm	Internal

Pin Diagram

100G BIDI QSFP28

Mechanical Dimension

100G BIDI QSFP28

Order Information

Part Number	Description
RQ-100GBD10-T27	100G QSFP28 BIDI Transceiver, TX1271nm/RX1331nm, Simplex LC,10km, 0~+70°C, with DDM
RQ-100GBD10-T33	100G QSFP28 BIDI Transceiver, TX1331nm/RX1271nm, Simplex LC,10km, 0~+70°C, with DDM

相关产品

100G QSFP28 SR4 100m 850nm MPO Optical Transceiver

100G QSFP28 SR4 100m 850nm MPO Optical Transceiver，support 100Gb/s and up to 100m transmission on MM fiber, it works in high-speed IDC connection solutions and so on. Features Compliant with IEEE Std 802.3bm Compliant with SFF-8665 Transmission data rate up to 25 .78125GbpsData rate per channel High Reliability 850nm VCSEL technology Electrically hot-pluggable Single +3 .3V power supply Case temperature range: 0 ~ +70℃ Maximum power consumption 2 .5W Single MPO12 connector RoHS complaint

100G QSFP28 CWDM4 2km LC Optical Transceiver

100G QSFP28 CWDM4 optical transceiver module, support 100Gb/s and up to 2 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.

100G QSFP28 LR4 1310nm 10km LC Optical Transceiver

100G QSFP28 LR4 optical transceiver module, support 100Gb/s and up to 10 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features 4 lanes MUX/DEMUX design Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF Support 100GBASE-ER4 for line rate of 103.125Gbps and OTU4 for line rate of 111.81Gbps Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant with IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

100Gb QSFP28 ER4 40Km 1310nm LC Optical Transceiver

100G QSFP28 ER4 optical transceiver module, support 100Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features: 4 lanes MUX/DEMUX design Support 100GBASE-ER4 for line rate of 103.125Gbps. Integrated LAN WDM TOSA / ROSA for up to 40 km reach over SMF. Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant withIEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

100Gb QSFP28 ZR4 80Km 1310nm LC Optical Transceiver

100G QSFP28 ZR4 optical transceiver module, support 100Gb/s and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features 4 lanes MUX/DEMUX design Support 100GBASE-ZR4 for line rate of 103.125Gbps and OTU4 for line rate of 111.81GbpsLANWDM EML laser and PIN receiver with SOA Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant withIEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

100Gb/s QSFP28 DWDM Dual CS Adaptor Transceiver

100G QSFP28 DWDM optical transceiver module, support 48*100Gb/s DWDM System and up to 80 km transmission on SM fiber, it works in high-speed IDC connection solutions.

100GBASE-SR Bi-Directional QSFP28 850/900nm 100m DOM LC MMF Optical Transceiver Module

100G QSFP28 BIDI optical transceiver module is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF). It offers customers a compelling solution that enables reuse of their existing 10 Gb duplex MMF infrastructure for migration to 100 Gigabit Ethernet connectivity.

100GBASE-LR Bi-Directional QSFP28 1280/1310nm 20km LC SM Optical Transceiver Module

100G QSFP28 BIDI optical transceiver module is a pluggable optical transceiver with a Simplex LC connector interface for long-reach data communication and interconnect applications using one core Single-Mode Fiber (SMF).

联系我们